INSTALL INSTRUCTIONS

 


FireFighter1 is typically simple to install if you are familiar with PVC plumbing & usually takes 15-30 minutes. 

Here's a link to more information & a quick install video with our partners at Greggs Pool Works



Before Installation                        After Installation
Pool Pump Before      



INSTALLATION INSTRUCTION

 

1.   Find ideal location between pool pump and filter to install a 3-way

diverter. **Setup so hose will face most desired location to protect.                  

2.  Cut into the PVC pipe and remove the portion allowing space.

3.  Prepare diverter to install at pool pump output and re-connect to PVC pipe where cut. May need a slip joint valve or tubing to reconnect.

4.  Cement in 3-Way Diverter to PVC pipe, then connect to pool pump output. *Make sure everything aligns before cementing.

5.  Install the polypropylene quick connect on the 3-way diverter.                           

6. Add FireFighter1™ Logo to 3-Way Valve, Directing “On” position.

7. Leave ready to connect FireFighter1™ whenever a fire emergency may arise.

 

We recommend you use a pool professional for installation if not familiar with PVC pipework. For more instructions.